Undercarriage parts

Delta Max crawler shoe

Targeting up to 20% life increase over the Standard Delta shoe, the Delta Max crawler shoe is built on a proven P&H legacy product that is designed to provides extended shoe life and reduce employee exposure to risks from maintenance activities.

Design features to promote longer life include:

• Raised roller path—improve overall system clearance to help extend life
• Increased pin size—up to 35% stronger than standard pin for increased fatigue life
• Increased pin lug size – up to 10% stronger than standard pin lug for increased fatigue life

Contact us

Crawler shoes

P&H Delta series crawler shoes are designed for fit and function with our OEM Delta series drive system. These components can help to control mine operating costs by extending crawler shoe and crawler system life, potentially resulting in a reduction in unplanned downtime for your operation.

Delta series crawler shows can potentially:

• Heighten productivity — they’re engineered as a complete system to promote enhanced component life, so you can get more out of your investment
• Lower the total cost of ownership — patented peening pads support better material flow for less residual stress
• Mitigate exposure — longer maintenance intervals can help lessen employee exposure to risks from maintenance activities

Contact us

Download brochure

Lower roller assembly

Extend the overall life of your crawler system. With a larger and thicker thrust washer, the P&H lower roller assembly is designed to provide a longer roller life and helps prevent damage to side frames.

• Improves grease delivery and flow to help extend system life
• Continuous bushing increases bearing areas and has integral grease grooves, which enhances lubrication flow for increased bushing life
• An improved and more robust retention helps decrease rotation and reduces lube system failure

Contact us

Download brochure

Delta drive system

ph三角洲驱动系统是专为光滑the engagement between shoes and tumbler, even when components are worn. The system can help reduce lug wear on both shoes and tumblers and can increase change-out intervals, helping control your employees’ exposure to risks.

• Helps reduce mine operating costs by promoting extended crawler shoe and crawler system life, mitigating unplanned downtime
• Promotes greater track efficiency by helping to reduce track tension and pitch mismatch
• Helps lower maintenance costs by minimizing the need for crawler belt adjustments and reducing stresses on pins and pin lugs

Contact us

Download brochure

Front idler

To keep your machine running smoothly and keep maintenance manageable, the right parts are critical. For your shovel, look to P&H front idler wheels for toughness and quality. They are engineered for exceptional track efficiency with a larger bearing area and lube distribution. Internal testing shows they reduce bearing stress by 50% to increase component life.

Other key details include:

• Splined connection between idler and shaft to match idler life with that of other lower works components
• Bearing blocks with bushings can be removed without breaking the track
• Heavy-duty rock guards help protect against damage from dirt and debris
• Dedicated lube injectors supply lubricant to critical wear surfaces

Contact us

Download brochure

Guide rail assembly

To help you save on operating and costs and downtime, a genuine P&H guide rail assembly for your rope shovel was designed with key features, that include:

• Wider profiled guide rail matching the profile of the crawler shoe path, minimizing the wear between the shoes and guide rails
• Optional polyurethane coating to further reduce wear between crawler shoes and guide rails to extend guide rail life

Contact us

Download brochure

Crawler frame upgrade

The OEM side frame-compatible crawler frame upgrade has been manufactured to help extend your shovel’s structural life. Finite Element Analysis (FEA) and strain gauge studies helped drive design changes, resulting in an enhanced structural life of up to 60,000 hours.

Features that help extend structural life:

• Enhanced inner and outer wall plate thickness
• Continuous welded guide rail eliminates cross welds
• More clearance between frame and crawler shoes

Compatibility features:

• Interchangeable with OEM side frames
• Designed to accept different mounting and transmission configurations
• Can be fitted with P&H final drive shaft upgrade

Contact us

Track and carrier rollers

Friction and shock loads transmitted from the track chain create heat within the roller. To withstand this, several quality steps are taken in the manufacturing of Komatsu genuine OEM rollers.

• To help keep oil in and dirt out, rollers are constructed of long-wearing, heat-resistant material supported by rubber load rings
• To reduce friction and help extend roller life, Komatsu OEM rollers utilize highly polished shafts and bronze bushings
• For strength and long wear life, rollers have heat-treated tread and flange areas
• To help keep you up and running, heavy-duty mounting brackets secure rollers to track frames, allowing the transmission of shock loads throughout the track frame
• Reservoir cavities in roller shells and shafts feed lubricant throughout the roller’s interior to reduce damage-causing heat
• 提供的吸收冲击载荷,避免房屋ttleness, hardness decreases toward the inner bore; surface hardness of the outer shell reduces wear caused by friction
• Greater flange height on Komatsu OEM rollers provides maximum track alignment and machine stability under varying operating conditions

Depending on the application, you can choose from a wide range of track rollers:

• Standard and single flange with internal lubrication, to offer track alignment during operation
• Cold weather spec, which has a different seal to withstand cold temperatures and maintain elasticity

Komatsu now offers conventional and general construction track rollers for PC200, PC220, PC300 and PC400.

Order online

Note: All comparisons and claims of improved performance made herein are made with respect to the prior Komatsu model unless otherwise specifically stated. Materials and specifications are subject to change without notice.

Track link assembly options

We understand your excavator needs are demanding and varied. Working with our valued customers, we’ve designed three different types of link assemblies for excavators to help you meet the needs of your wide-ranging machine applications.

• Grease Sealed Track (GST): The link assemblies of the GST consist of links, pins, bushings and a “W” seal. These assemblies are the basic form of the sealed track, but include grease to help reduce internal pin and bushing wear, promoting extended life of the assembly.
• General Construction (GC): These track link assemblies help control operating and maintenance costs based on application. Compatible with Komatsu PC160, PC200, PC300 & PC400 excavators, these parts perform well for general construction applications. Please note: GC link assemblies should not be used in high impact applications such as quarries, forestry and waste applications.
• Skidding Link Assembly: This innovative link structure is engineered for strength and reinforcement that delivers durability, especially in demanding applications such as forestry.

Contact us

Order online

Track and carrier rollers

Komatsu genuine OEM rollers are constructed of long-wearing, heat-resistant material supported by rubber load rings that keep oil in and dirt out. Highly polished shafts and bronze bushings help reduce friction and promote extended roller life. Heat-treated tread and flange areas also contribute to increased strength and longer wear life.

Other key features:

• Heavy-duty mounting brackets secure rollers to track frames, allowing the transmission of shock loads throughout the track frame, thereby reducing potential damage
• Reservoir cavities in roller shells and shafts feed lubricant throughout the roller’s interior to help mitigate damage-causing heat
• Surface hardness of the roller’s outer shell helps to alleviate wear caused by friction
• Material hardness tapers toward the inner bore to help impede brittleness and provide absorption of shock loads
• Expanded flange height promotes effective track alignment and machine stability under varying operating conditions

Depending on the application, you can choose from a wide range of track rollers:

• Standard, single flange and double flange — for standard rollers
• PLUS (Parallel Link Undercarriage System), single flange and double flange — with increased tread depth and flange height, and internal lubrication 
• Cold weather spec — seal designed to withstand cold temperatures and help maintain elasticity
• 传统和一般建筑履带支重轮s available for Komatsu D51, D61 and D65 crawler dozers

Order online

Note: All comparisons and claims of improved performance made herein are made with respect to the prior Komatsu model unless otherwise specifically stated. Materials and specifications are subject to change without notice.

Track link assembly options

You need reliable, high-quality components for your operation. We’ve designed the following six types of bulldozer link assemblies to address the needs of diverse working environments.

• SALT (Sealed and Lubricated Track): For dozers that travel often, the SALT link assembly is lubricated with oil to help reduce wear between the pin and the bushing
• PLUS (Parallel Link Undercarriage System): Suitable for small and medium-size dozers, the PLUS line can deliver up to twice the life vs. standard options with its Komatsu-exclusive design that features a rotating bushing to help minimize wear between segment and bushing
• AR (Abrasive Resistant): For abrasive applications, such as loam or sand, the AR track link features enhanced bushing material and is manufactured using a patented heat treatment process for deep-hardened depth
• GC (General Construction): GC undercarriage components help minimize the operating and maintenance costs of your construction machines
• HD (Heavy Duty): Engineered for enhanced performance in rocky applications, the ruggedized HD track link offers increased link height and a larger bushing
• DB (Dual Bushing): Suitable for large-size dozers operating in abrasive applications, a rotating bushing helps mitigate segment and bushing wear, manufactured with two bushings and an internal lubrication

Order online

Track shoes

Track shoes provide the working platform for the machine, penetrating the ground and giving the machine traction to move. Proper shoe selection is important for better machine performance and longer undercarriage life; the narrowest shoe possible that allows adequate flotation should always be selected. A wider shoe is more likely to reduce the life of the undercarriage, due to flexing while the machine is riding over rocks and hitting obstacles.

Choose the correct shoe for your underfoot condition:

• Single grouser: Manufactured for rugged operations, the extra-thick grouser offers excellent resistance
• Double/triple grouser: Provides lower traction due to low grousers and operates efficiently on soft ground and during cargo handling in ships. It is low in turning resistance, high in maneuverability
• Heavy duty shoe: Suitable for mid-size and large dozers that are used in abrasive, high-impact applications; the grouser and plate portions of this shoe are thicker and stronger, providing higher bending and wear resistance
• Swamp: For use in small and mid-size dozers in swamp applications, this shoe is designed with an arc-style penetration, creating buoyancy

Contact us

Note: All comparisons and claims of improved performance made herein are made with respect to the prior Komatsu model unless otherwise specifically stated. Materials and specifications are subject to change without notice.

Excavator track shoes

Track shoes penetrate the ground giving the machine traction to move — proper shoe selection is important for optimum machine performance and long undercarriage life. The narrowest shoe that allows adequate floatation should always be selected; a wider shoe could reduce the life of the undercarriage due to flexing while the machine is riding over rocks and hitting obstacles.

• Triple grouser: For efficient operation on soft ground and during cargo handling in ships, these strong, sturdy shoes for low penetration are equipped with three grousers of equal height, for low turning resistance, high maneuverability
• Double/single grouser: For work in adverse conditions, these types of shoe have taller grouser bar, designed for increased penetration
• Heavy-duty shoe: For abrasive and high-impact applications, the grouser and plate portions of this shoe are thicker and stronger, which provides high bending and wear resistance
• Roadliner/city shoe: For operating on smooth asphalt and other paved or cement surfaces, this shoe is for low noise and low vibrations

Contact us

Order online

Note: All comparisons and claims of improved performance made herein are made with respect to the prior Komatsu model unless otherwise specifically stated. Materials and specifications are subject to change without notice.